The VALUE of DESIGN

Given the small area of most bathrooms, and the number of elements that need to be included, it is no wonder why remodeling can be such a challenge. However, breaking the obstacles down to their most honest form reveals a much simpler challenge, and fortunately, simple challenges usually have simple solutions.

No budge in the budget ...

Let's face it; the budget dictates your project. Even if it's a generous budget, it's still the deciding factor in not only the choices you make, but also the options you have to choose from. In fact, the only thing more important than creating the budget is sticking to it - and in a big-box-world of choices, sticking to a budget isn't easy…

…and the solution is not always about cutting back.

It is about making smart choices. Educating yourself about the available options is a good place to start, but the information is only as good as the source, and if you are counting on a teenager standing in the tile aisle of your local big box as your main source of information, then you may be placing your project in the hands of someone with very little practical knowledge. This assistance is probably fine for choosing paint colors, or a cool new lamp, but surely not the best source when considering plumbing and electrical code. In order to make the most informed decisions, you need a professional who is familiar with your home’s intricacies.

Your one defense against budget breaking choices are the experts you rely on. Yet for some reason, when attempting to control the budget, professional design is often the first item scratched off the list.

Design takes into account all of the elements: plumbing, electrical, traffic movement, ventilation, storage space, and aesthetics. A good design means that you will have a convenient place to plug in your blow dryer. It means that your door will close properly. It also means that the toilet is not the first thing you see when you walk past the bathroom.

A good design ensures the room will last. It alleviates mold and mildew before it starts to grow. It allows for plumbing accessibility in case of a malfunction. A good design means you only remodel once, the right way, with the right elements, chosen with the help of someone who knows which faucets will last, which tile is too slippery, and how to save you money without sacrificing value.

Consider this: over the past three years of projects, 100% of our customers surveyed reported that they were satisfied with how we handled their budget. We attribute this to the planning that takes place in the design phase, and more importantly, the resulting low incidence of change orders and surprises during construction.

When was the last time you talked to a friend who remodeled, and they reported their project actually stayed on budget?

If remodeling choices are truly about money, and they always are, the question is not if you can afford to use a design/builder, but rather, if you can afford not to use one.

If you clog your sink drain...

A client recently reported that he has clogged his prep sink and asked for advice. Personally, I find clogs to be rare if you use your garbage disposal properly while running water through it. The only time I ever clogged a pipe myself was in an apartment after putting potato peels down a disposal. I learned my lesson!

Here is a primer on how you can try to first avoid, and then repair, this potential problem.

1) Make sure that the garbage disposal gets run every time anything is put down it. Run it with water. If there is a lot of waste going down it, run the disposal with water running for 30 seconds after the disposal sounds like the debris is cleared.

2) If you do clog the drain, one way to try to "force" the issue is to fill the sink up with water, pull the drain plug, run the disposal, and the disposal will "push" the debris through by force because it will be pushing the water out.

There is a risk: that you end up with the sink full of water and a clog so severe that it does not clear out with that force. The other risk is that if there is a dishwasher air gap or a double sink, you will actually force water backwards up into the other sink or out through the air gap. If this happens, it is an indication that the clog is beyond the P-trap and in the main line of the drain.

If the sink remains full of water, take a container and scoop out the water and get rid of it through another sink so that the next step gets easier for you.

3) Disassemble the P-trap under the sink and clear it out. That can be done without tools, usually you can do it by hand because they are plastic fittings. Pay attention to how it comes apart and put it together exactly the same again. Place a bucket underneath as you disassemble it so that no water spills into the cabinet. Wear long rubber gloves if you are going to get grossed out about getting a little dirty water/debris on you.

After doing this, you should be able to visually see whether the trap or pipe is clogged. Look at the inside of the P-trap. Is it full of debris? Is gunk caked onto the sides of it? Clean it out. Look where the drain pipes continue toward the wall, usually a horizontal run before it goes to the wall into a vertical drain. Is that clogged with gunk or debris? Clean it out. If the P-trap and the adjacent run of pipe are not the culprit, then move on to part 4.

4) Use a drain snake to clean out the pipe. If you don't own one, you can buy one or rent one from a home center, lumber yard, or supply house. You can also call a plumber at this point if it is beyond your skills or your gag reflex!

Good luck. Please respond with any additional tricks, tips, or questions that I can answer.